STEVAL-ILL009V3
search
  • STEVAL-ILL009V3
ID: 198536
227,75 zł
Brutto

185,16 zł Netto

OSRAM OSTAR® projection LED board, STM, RoHS

24h
Dostępny
Dostępna ilość: 1
 

Wysyłka gratis

darmowa wysyłka na terenie Polski dla wszystkich zamówień powyżej 500 PLN

 

Wysyłka tego samego dnia

Jeśli Twoja wpłata zostanie zaksięgowana na naszym koncie do godz. 11:00

 

14 dni na zwrot

Każdy konsument może zwrócić zakupiony towar w ciągu 14 dni bez zbędnych pytań

STEVAL-ILL009V3
OSRAM OSTAR® projection LED board, STM, RoHS


This board should be connected through the 30- pin connector to the STEVAL-ILL009V1 control board to be able to show the light effect with the board. The OSTAR® projection module, used as light source, has a maximum forward current of 700 mA. The NTC resistor is directly assembled on the OSTAR® module. As the power of the module is above 10 W, the heatsink is used to keep the temperature in range. The biggest advantage of the OSTAR® module is that red, green and blue LEDs are in the same package, very closely assembled and therefore the color effect is better than with three separate LEDs.

Features:

  • Outstanding brightness and luminance due to pure surface emission and low Rth prepared for additional optics
  • Dominant wavelength: 617 nm amber (red)
  • Dominant wavelength Color 2: 525 nm true green
  • Dominant wavelength color 3: 464 nm blue
  • Viewing angle at 50 % IV : 120 ° (lambertian emitter)
  • Light emitting surface: (typ.) 2.1 x 2.1 mm2
  • Technology: InGaAlP thinfilm amber (red)
  • Technology color 2: ThinGaN true green
  • Technology color 3: ThinGaN blue


Contents:

  • STEVAL-ILL009V3 Board

Download:

198536

Powiązane produkty

Produkty z tej samej kategorii (16)

W ramach naszej witryny stosujemy pliki cookies w celu świadczenia Państwu usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Więcej szczegółów w naszej polityce prywatności.