Categories

Expansion Shield X300 for Raspberry Pi B+/2B/3B

Expansion Shield X300 with RTC real time clock; audio input and output; USB hub; Bluletooth, WIFI; SATA interface. Compatible with Raspberry Pi Model B+, Pi 2 Model B and Pi 3 Model B

More details

ID: 559623

40.27EUR excl. VAT
49.53EUR incl. 23% VAT

Add to wishlist

More info

Description

Expansion Shield X300 is a one of the most cost-effective shield which could apply to Raspberry Pi Model B+, Raspberry Pi 2 Model B and newest Raspberry Pi 3 Model B. It integrates a lot of very useful functions such as RTC real time clock; audio input and output; USB hub; Bluletooth, WIFI; SATA interface. With this shield, you can build Raspberry Pi projects more easily and save both time and cost.

Features

  • Input Voltage: 6V to 18Vdc converted to 5V, 4A via step-down DC/DC converter to power the Raspberry Pi
  • SATA: Allows you to connect SATA devices to your Raspberry Pi
  • Audio:
    • 3.5mm MIC in jack
    • 3.5mm stereo audio jack
    • SPDIF output
    • Audio IO connector (Microphone input and stereo audio amplifier 3.3Wx2)
  • Wireless:
    • WiFi (IEEE 802.11b/g/n) with external antenna
    • IR sensor (38KHz)
    • Bluetooth serial communication
  • USB Storage: Self-powered USB hub with 3 ports
  • Real-time clock (RTC): Based on DS3231SN with included CR2032 battery
  • Power output socket
  • Camera flex slot so camera can still be used with the expansion board attached
  • DIP switch to remove connection from RPi’s pin header
  • Directly connected on top of the Raspberry Pi using the board GPIO header pins
  • No wiring nor soldering is required
  • Duplicated the 40-pin header of the R-Pi in order to support existing expansion boards
  • Suitable for Raspberry Pi Model B+ and Raspberry Pi 2 Model B Dimensions: 85 x 56mm (Same size as Raspberry Pi)
Attention: When you power Raspberry Pi with the shield power resource, please don't power it again via the Micro-USB port, it will damage the board!

Package includes:

  • 1 x X300 expansion board
  • 1 x USB adapter
  • 1 x 2.4GHz WIFI antenna
  • 4 x nylon spacers (M3 x 20mm)
  • 8 x nylon screws  (M3 x 6mm)

Download

Manufacturer

Accessories