TerasIC C5G (P0150)
search
  • TerasIC C5G (P0150)
ID: 208056
1 840,23 zł
Brutto

1 496,12 zł Netto

Cyclone V GX Starter Kit
24h
Dostępny
Dostępna ilość: 1
 

Wysyłka gratis

darmowa wysyłka na terenie Polski dla wszystkich zamówień powyżej 500 PLN

 

Wysyłka tego samego dnia

Jeśli Twoja wpłata zostanie zaksięgowana na naszym koncie do godz. 11:00

 

14 dni na zwrot

Każdy konsument może zwrócić zakupiony towar w ciągu 14 dni bez zbędnych pytań

TerasIC C5G (P0150)

Overview

The Cyclone V Starter Kit presents a robust hardware design platform built around the Altera Cyclone V GX FPGA, which is optimized for the lowest cost and power requirement for transceiver applications with industry-leading programmable logic for ultimate design flexibility. With Cyclone V FPGAs, you can get the power, cost, and performance levels you need for high-volume applications including protocol bridging, motor control drives, broadcast video converter and capture cards, and handheld devices. The Cyclone V Starter Kit development board includes hardware such as Arduino Header, on-board USB Blaster, audio and video capabilities and much more. In addition, an on-board HSMC connector with high-speed transceivers allows for an even greater array of hardware setups. By leveraging all of these capabilities, the Cyclone V Starter Kit is the perfect solution for showcasing, evaluating, and prototyping the true potential of the Altera Cyclone V GX FPGA.

Specification

  • FPGA Device
    • Cyclone V GX 5CGXFC5C6F27C7N Device
    • 77K Programmable Logic Elements
    • 4884 Kbits embedded memory
    • Six Fractional PLLs
    • Two Hard Memory Controllers
    • Six 3.125G Transceivers
  • Configuration and Debug
    • Quad Serial Configuration device – EPCQ256 on FPGA
    • On-Board USB Blaster (Normal Type-B USB connector)
    • JTAG and AS mode configuration supported
  • Memory Device
    • 4Gb LPDDR2 x32 bits data bus
    • 4Mb SRAM x16 bits data bus
  • Communication
    • UART to USB
  • Expansion I/O
    • HSMC x 1, including 4-lanes 3.125G transceiver
    • 2x20 GPIO Header
    • Arduino header, including analog pins
    • SMA x 4 (DNI), one-lane 3.125G transceiver
  • Display
    • HDMI TX, compatible with DVI v1.0 and HDCP v1.4
  • Audio
    • 24-bit CODEC, Line-in, line-out, and microphone-in jacks
  • Switches, Buttons, LED, and 7-Segments
    • 18 LEDs
    • 10 Slide Switches
    • 4 Debounced Push Buttons
    • 1 CPU reset Push Buttons
    • Four 7-Segments
  • Micro SD Card Socket
    • Provides SPI and 4-bit SD mode for SD Card access
  • Power
    • 12V DC input
  • Block Diagram

Layout




  • Size 145*115.8 mm

Kit Contents



  • Cyclone V GX Starter Kit board
  • Cyclone V GX Starter Kit Quick
  • Start Guide
  • Type A to B USB Cable
  • Power DC Adapter (12V)

Demo




Download:


208056

Produkty z tej samej kategorii (16)

W ramach naszej witryny stosujemy pliki cookies w celu świadczenia Państwu usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Więcej szczegółów w naszej polityce prywatności.