TB-7Z-020-EMC
search
  • TB-7Z-020-EMC
ID: 204678
9 505,61 zł
Brutto

7 728,14 zł Netto

Xilinx Zynq-7000 AP SoC Extension Card By Inrevium™

6 tyg.
Produkt dostępny na zamówienie

 

Wysyłka gratis

darmowa wysyłka na terenie Polski dla wszystkich zamówień powyżej 500 PLN

 

Wysyłka tego samego dnia

Jeśli Twoja wpłata zostanie zaksięgowana na naszym koncie do godz. 11:00

 

14 dni na zwrot

Każdy konsument może zwrócić zakupiony towar w ciągu 14 dni bez zbędnych pytań

TB-7Z-020-EMC
Xilinx Zynq-7000 All Programmable SoC Extension Card By Inrevium™, RoHS



The TB-7Z-020-EMC is an evaluation platform fitted with both an ARM® Cortex™-A9 MPcore with on-chip connection to an FPGA fabric and a Zynq-7000 All Programmable SoC that incorporates a range of peripheral functions. It can be used to implement evaluation systems into various different development projects.

Large logic development projects typically require hardware and software engineers to share the limited number of evaluation systems. In particular, development inefficiencies arise such as the long time simulation and lack of seamless emulation, if software engineers are unable to use their evaluation system frequently.

When used in conjunction with TED's TB-7V-2000T-LSI ASIC development test platform or FPGA evaluation platforms fitted with an FMC connector, the TB-7Z-020-EMC facilitates task separation between hardware and software engineers, helps budget cut and reduce the development time significantly. The new TB-7Z-020-EMC features ease of connection to the main FPGA evaluation platform, and software engineers can use it to test the performance repeatedly on the real hardware during the development process. This provides a system-level evaluation environment that can be used with greater efficiency than was possible in the past.

By featuring small size and a wide range of interfaces, TB-7Z-020-EMC goes far beyond just connection ability with FPGA evaluation platform. The card can also demonstrate its high level performance and design productivity not only as the development environment, but also for the development of the application which require powerful ARM processor to differentiate your products from competitors. With supporting FMC connector, additional interfaces can be added easily to support the targeted application. This means that the TB-7Z-020-EMC can facilitate innovative product developments, and also can satisfy the diverse needs of developments to differentiate their products from competitors. Software reference designs are also available, including design for connection to various types of FPGA evaluation boards, for DVI interface and for Linux-based embedded systems.

Key Features:

  • Device
    • XC7Z020-CLG484
  • Memory
    • DDR3 SDRAM x 2 (16-bit data bus x 2)
    • MicroSD card socket and media x 1
    • 128 Mbit QSPI flash memory x 1
  • Expansion Interface
    • FMC (LPC) x 2
    • Samtec ASP-134604-01 (Mezzanine)
    • Samtec ASP-134603-01 (Carrier)
    • Pmod (Digilent module interface) x 1
  • Standard Interface
    • Gigabit Ethernet x 1
    • USB2.0 x 1
    • UART (RS-232C) x 1
    • CAN x 1
    • DVI TX x 1
  • Debug Interface
    • JTAG x 2
    • MICTOR-38 for ARM
    • 10-pin header for Xilinx Cable
    • LED
    • DIP SW
    • Push SW
  • Clock
    • Multi-clock generator
    • ARM 33.33MHz
    • Logic 148.5MHz
  • Documentation
    • Hardware Users Manual
    • Reference Design Guides
    • Schematics
  • Reference Design (Verilog HDL)
    • Reference design for connection to FPGA evaluation board
    • Reference design using DVI output
    • Linux boot reference design

Code: C/N: GEMINI

204678

Produkty z tej samej kategorii (16)

W ramach naszej witryny stosujemy pliki cookies w celu świadczenia Państwu usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Więcej szczegółów w naszej polityce prywatności.