Micro:Mate is an expansion board for the micro: bit development module....
ual MAX14870 Motor Driver is a dual DC motor driver compatible with the...
Reflective sensor module with 16 QTRX-MD type optocouplers with analogue...
A desoldering station with a heating capacity of 80W, with a ceramic...
STSPIN220 stepper motor driver module with a low voltage range of...
The I2C electric level conversion module is specifically designed for Banana Pi. The module converts the 3.3V of I2C electric level to 5V level or converts 5V to 3.3V
7 inch Capacitive Touch Screen LCD, HDMI interface, supports various systems. For Raspberry Pi (B, A+, B+, 2), Banana Pi, Banana Pro, BeagleBone Black
Aluminum Heat Sink for the Banana Pi CPU/GPU chip
BPI AD/DA extend module with the PCF8591 single-chip, single-supply low-power 8-bit CMOS data acquisition device with four analog inputs, one analog output and a serial I2C-bus interface
The Serial Port module is specifically designed for Banana Pi with the module use Maxim MAX232 chip and DB9 port
Camera for computer Banana Pi M2+, with sensor CMOS 5 Megapixels (OV5640). BPI-M2+ camera module
Small open-source development board with an on-board HD video camera capable of capturing 720p videos at 30fps
This is an aluminum heat-sink for the Banana Pi RAM Chips. Run cool RAM chips with this little add-on. Just one heat-sink is needed to cover both RAM chips, use the picture below as reference. Signs of RAM or CPU overheating are computer stops responding, frozen screen and power shutt down or cycling.
Banana pi BPI-G1 WIFI, BT4.0, Zigbee smart home gateway board
Banana PI BPI-M1 dual core single-board computer
Banana Pi M1 Enclosure - BLACK
Banana Pi M1 Enclosure -CLEAR
Banana Pi M1 Enclosure - WHITE
Banana Pi M1+ 1GB RAM Dual Core WiFi
Banana Pi M2 1GB RAM Quad core single-board computer