Categories

KA-LOGO!-IO-Simulator - simulation kit for Siemens LOGO! 8

KA-LOGO!-IO-Simulator kit helps to simulate logical states on the Siemens LOGO! 8 inputs. With the IO simulator board, You can simulate each bits on the LOGO! inputs using toggle switches. It is also possible to use the embedded LOGO! ADC's to measure a voltage, ALS or temperature values.

More details

ID: 563006

20.24EUR excl. VAT
24.90EUR incl. 23% VAT

Add to wishlist

More info

Opis

KA-LOGO!-IO-Simulator kit helps to simulate logical states on the Siemens LOGO! 8 logical controler inputs. With the IO simulator board, You can simulate each bits on the LOGO! inputs using toggle switches. It is possible to use the embedded LOGO! ADC's to measure a voltage, ALS or temperature values. Included LED module can signalise states of four LOGO! outputs. Integrated LED drivers (NCR401U by Nexperia) provides constant brightness of the indicators.The kit is especially recommended for Automation Engineers and persons, who wants to learn and tests their codes without connecting every used sensors.

Parameters

  • IO simulator module:
    • The module is dedicated for using with LOGO! 8 (supplied from 24 V DC)
    • It has gold plated pins, which provides the best contact with PLC terminal blocks.
    • It allows to simulate each eight bits using two position switches
    • It allows to use the capabilities of the built-in LOGO! 8 ADC converters by measure the analog value from sensors (switch by J7, J8):
      • temperature sensor MCP9700, with output voltage scalled to the measure range of LOGO! 8 (+5…+105°C)
      • potentiometer
      • phototoresistor (ALS)
      • external sensor, connected to the terminal blocks (EXTIN)
    • It is equipped with terminal blocks, which gives the possibility of easy connecting to the 24V DC power source and to the external sensor.
    • Using special spacers (included), the IO simulator module doesn't strain the terminal blocks of LOGO! 8 logic controller.
  • LED indicators module:
    • The module is dedicated for using with LOGO! 8 (supplied from 24 V DC)
    • Gives a posibility of indicating digital output states of the LOGO! 8 (Q1...Q4)
    • Built-in NCR401U LED drivers by Nexperia provides constant lights brightness
    • It has gold plated pins, which provides the best contact with PLC terminal blocks.
    • It has terminal block, which gives the possibility of easy connecting the 24V DC lines

Example of cooperation with the Siemens LOGO! 8 (not included!)

Example of cooperation with the Siemens LOGO! 8 (not included!)

Included

  • Assembled and tested module of IO simulator
  • Assembled and tested module of LED indicators
  • Two spacer sleeves
  • Two screws for spacer sleeves

KA-LOGO!-IO-Simulator - what's included

Download

Manufacturer