Mini ST-LINK/V2, in-circuit debugger/programmer for STM8 and STM32
The S9V11MA switching step-up/step-down regulator efficiently produces a...
The case has openings for all outputs including the GPIO port making it a great fit for projects that are connected to external hardware.
We have designed these cases for those who appreciate the beauty of the naked PCB board, but still want to protect the ODROID-C1+/C2 from the dust and the elements. The semi-transparent case has openings for all outputs including the GPIO port making it a great fit for projects that are connected to external hardware.
There are openings for Ethernet, 4 x USB Host, microUSB, HDMI and DC Jack. The cover over GPIO pins can be easily removed by cutting of a few ribs and will give you easy access to the GPIO port. If you are using the USB-UART Module kit, the cable can also be routed through this opening.
Fit the ODROID-C1+/C2 in the case using the locking tabs and secure it using two included screws through the screw holes on the bottom side. A spare screw is included in the package. You will need a small screwdriver. This case has more vent holes on the bottom side and has a slot for your MicroSD card.
The drawings of the plastic case is supplied in AutoCAD format.