The DE10-Standard Development Kit presents a robust hardware design...
This is a very special adapter, specifically used for adapting our...
DS3231 Precision RTC FeatherWing adds an extremely accurate...
The Pmod TMP3 is an ambient temperature sensor built around the...
Raspberry Pi Sense HAT The Sense HAT has an 8×8 RGB LED matrix, a...
The MAXimator is an entry-level evaluation board with modern Altera MAX10 FPGA. The board can interface to external peripheral modules via Arduino Uno Rev 3 connectors. It also features HDMI+CEC+DCC and VGA interfaces
The heart of the MAXimator board is MAX10 FPGA supported by free Altera Quartus Prime.
The MAXimator starter board set includes all you need for rapid FPGA development: the starter board with MAX10 FPGA, USB programmer (USB Blaster compatible) and multi-function shield (for free with the first 600 sets).
The MAXimator board is easy to expand with Arudino Uno R3 style connectors and free IP core libraries from Altera, available as a part of Quartus Prime software.
► Altera MAX10 FPGA, 10M08DAF256C8GES
► Arduino Uno Rev 3 connectors (5V)
► 5 ADC channels (12-bit, 1MSPS), overvoltage protection (Input voltage 0…+2.5V)
► HDMI interface (CEC, DDC)
► VGA video interface
► 10MHz crystal external generator
► 4 user LEDs
► Power LED, configuration LED
► Analog potentiometer
► MicroSD memory card slot
► UART to USB converter connector
► Altera Enpirion PowerSoC regulators
► Global reset button
► Powered from USB cable (protected by polymer fuse) or external 5V source
► JTAG header for external USB-Blaster download cable