• Obecnie brak na stanie
Anvyl
search
  • Anvyl
ID: 206926

Xilinx Spartan-6® LX45 FPGA Development Board, Digilent

Wycofany
 

Wysyłka gratis

darmowa wysyłka na terenie Polski dla wszystkich zamówień powyżej 500 PLN

 

Wysyłka tego samego dnia

Jeśli Twoja wpłata zostanie zaksięgowana na naszym koncie do godz. 11:00

 

14 dni na zwrot

Każdy konsument może zwrócić zakupiony towar w ciągu 14 dni bez zbędnych pytań

Anvyl™ Spartan-6 LX45 FPGA Development Board



The Anvyl FPGA development platform is a complete, ready-to-use digital circuit development platform based on a speed grade -3 Xilinx Spartan-6 LX45 FPGA. The large FPGA, along with the 100-mbps Ethernet, HDMI Video, 128MB DDR2 memory, 4.3” LED backlit LCD touchscreen, 128x32 pixel OLED display, 630 tie-point breadboard, multiple USB HID controllers, and I2S audio codec, makes the Anvyl an ideal platform for an FPGA learning station capable of supporting embedded processor designs based on Xilinx’s MicroBlaze.

The Anvyl is compatible with all Xilinx CAD tools, including ChipScope, EDK, and the free ISE WebPack™, so designs can be completed at no extra cost. The board dimensions are 27.5cm x 21cm.

The Spartan-6 LX45 is optimized for high performance logic and offers:

  • 6,822 slices, each containing four input LUTs and eight flip-flops
  • 2.1Mbits of fast block RAM
  • four clock tiles (eight DCMs & four PLLs)
  • 58 DSP slices
  • 500MHz+ clock speeds

Key Features:

  • Spartan6-LX45 FPGA (XC6SLX45-CSG484-3)
  • 128MB DDR2 SDRAM
  • 2MB SRAM
  • 16MB QSPI FLASH for configuration and data storage
  • 10/100 Ethernet PHY
  • HDMI Video Output
  • 12-bit VGA port
  • 4.3" wide-format vivid color LED backlit LCD screen
  • 128x32 pixel 0.9" OLED graphic display panel
  • three two-digit Seven Segment LED displays
  • I2S Audio codec with line-in, line-out, mic, and headphone
  • 100MHz Crystal Oscillator
  • on-board USB2 ports for programming and USB-HID devices (for mouse/keyboard)
  • Digilent USB-JTAG circuitry with USB-UART function
  • keypad with 16 labeled keys (0-F)
  • GPIO: 14 LEDs (10 red, 2 yellow, 2 green), 8 slide switches, 8 DIP switches in 2 groups and 4 push buttons
  • breadboard with 10 Digital I/O’s
  • 32 I/O’s routed to 40-pin expansion connector (I/O’s are shared with Pmod connectors)
  • seven 12-pin Pmod connectors with 56 I/O’s total
  • ships with a 20W power supply and USB cable

Download:


Code: 410-258P-KIT

206926

Produkty z tej samej kategorii (16)