STM32L0 Discovery kit LoRa, low-power wireless. B-L072Z-LRWAN1
Small GPS location module with L80-39 GPS chip, USB and TTL two...
Dynamic NFC/RFID tag IC expansion board based on ST25DV04K for STM32...
This Bluetooth Audio receiver module includes a USB port and TF card...
relative humidity sensor with integrated temperature sensor for...
320x240 pixels display driven with the ILI9341 chipset, PiTFT, TFT shield v2 and 2.8" TFT breakout. Adafruit 1774
5 inch Resistive Touch Screen LCD, HDMI interface, supports various systems
7 inch Capacitive Touch Screen LCD, HDMI interface, supports various systems. For Raspberry Pi (B, A+, B+, 2), Banana Pi, Banana Pro, BeagleBone Black
2.8" display with 320x240 16-bit color pixels and a capacitive touch overlay fits perfectly onto the Raspberry Pi 3/2/A+/B+. The display and touchscreen uses the hardware I2C Pins (SDA & SCL), SPI pins (SCK, MOSI, MISO, CE0) as well as GPIO #25 and #24. Adafruit 2423
This is a very special adapter, specifically used for adapting our RTD266X driver boards that have 50-pin TFT connectors to use 40-pin TFTs. Please note the adapter cannot be used the other way around! As an addition, we add in an AR1100 resistive touch controller. Adafruit 3305
5" TFT display with WVGA 800x480 resolution and it has a resistive touchscreen overlay. This display comes with a driver board with HDMI, VGA, and Composite inputs and USB-enabled 40-pin to 50-pin touchscreen adapter board. Adafruit 2110
This is a little 5" TFT display with WVGA 800x480 resolution and it has a resistive touchscreen overlay. The driver board only has an HDMI input but for Raspberry Pi, BeagleBone Black and other computers. Adafruit 2109
Module with Nokia 6100/6610 color graphic LCD
TFT COLOR 3.5", 92x78.4mm, ACTEL IGLOO video memory controller, easy-to-use static interface, 8-bit color, 320x240, integrated touchpanel (ZIF20 connector, R=1mm)
TFT COLOR 4.3", 120x85mm, video memory controller, easy-to-use static interface, 8-bit color, 480x272, integrated touchpanel
TFT COLOR 5.6", 160x109mm, video memory controller, easy-to-use static interface, 8-bit color, 640x480
Module with 2.8-inch TFT display and touchpanel, SD-card socket
Module with 3.2-inch TFT display and touchpanel
The Terasic LT24 is a 2.4” LCD touch module with 240(H) x 320(V) display resolution. It can be bundled with various Terasic FPGA development boards through the 2x20 GPIO interface. P0185
VmodTFT - Color LCD Touchscreen