The DE10-Standard Development Kit presents a robust hardware design...
RS485 communication board, SP3485 on board, 3.3V
Hybrid bipolar stepping motor with integrated 38cm (15″) threaded...
Hybrid bipolar stepper motor eith integrated 18cm (7″) threaded...
This control board turns the Romi chassis into a programmable robot...
16-channel GPIO expander with an I2C interface microcontroller can interface with 16 fully configurable digital input/output pins. It can produce PWM signals, so you can dim LEDs. It can be set to blink or even breathe pins at varying rates. With a built-in keypad engine, it can interface with up to 64 buttons set up in an 8x8 matrix. BOB-13601
SEN-11486 OSHW - 9 Degrees of Freedom - MPU-9150 Breakout
SparkFun SEN-10736 - 9 Degrees of Freedom - Razor IMU, 28mm x 41mm, RoHS
SEN-12636 - 9 Degrees of Freedom IMU Breakout - LSM9DS0
Arduino and Breadboard Holder. DEV-11235
DEV-10116 - Arduino Fio
3.3V Arduino running the 8MHz bootloader. DEV-10914
DEV-09815 In Fritzing Library - Ardumoto - Motor Driver Shield
Bare Conductive’s Electric Paint is just like any other water-based paint… except that it’s electrically conductive! This means that you can actually paint wires onto things like models, clothes, furniture, walls, almost anything you can think of. COM-11521
COM-10994 - BarePaint - Conductive Paint (50ml)
COM-11274 Button, 100mm diameter (outside diameter) dome illuminated push button comes with an LED, securing nut and a pre-installed long life horizontal microswitch
COM-11275 Button, 100mm diameter (outside diameter) dome illuminated push button comes with an LED, securing nut and a pre-installed long life horizontal microswitch