The DE10-Standard Development Kit presents a robust hardware design...
This is a very special adapter, specifically used for adapting our...
DS3231 Precision RTC FeatherWing adds an extremely accurate...
The Pmod TMP3 is an ambient temperature sensor built around the...
Raspberry Pi Sense HAT The Sense HAT has an 8×8 RGB LED matrix, a...
Mini USB Bluetooth dongle compatible with ODROID-C1, C1+, C0, C2 and XU3, XU4
Compatible with XU / XU3 / XU4 Series
LED Matrix Shield works with ODROID-C1 / C1+ / XU4 (combination with XU4 Shifter Shield)
Micro USB-DC Power Bridge Board for ODROID-XU4 users who use ODROID-VU7 or VU7plus. This bridge board is to supply separated 5V power to the ODROID-VU7 and VU7 Plus
Attitude Heading Reference System, Odroid C0, C1, C1+, C2, XU3, XU4
A new game controller that is similar to the steering wheel available for the Nintendo Wii. It is built using the USB IO BOARD and an auxiliary motion sensor, and allows you to play many games available for mobile phone that would normally use the phone’s gyroscope
USB IO Board, compatible for ODROID-C2, C1, C1+, C0, XU4 Series
USB-UART board for ODROID, Compatible with ODROID-C1, C1+, C0, XU4, C2
USB Audio Adapter works with ODROID-C1 / XU4 / C0 / C2
Xprotolab Plain is an Oscilloscope, Logic Analyzer, Waveform & Clock generator all in one tiny, light weight and low cost package which are fully compatible with ODROID-C1/C2/XU4 Linux platforms
This level shifter board contains 3 x TSX0108E bi-directional level shifter ICs. The 30-pin and 12-pin GPIO ports on the XU4 are converted to the more common 0.1inch (2.54mm) pitch 40-pin header. All the signals can be level shifted to 3.3V or 5V.