
MAXimator PROMO with Expander...
49.00EUR
Mini ST-LINK/V2, in-circuit debugger/programmer for STM8 and STM32
The S9V11MA switching step-up/step-down regulator efficiently produces a...
Subcategories
Laser acrylic enclosure for the 3.5inch LCD Shield for Odroid C1, Odroid C1+ and Odroid C2. Color: Clear
Laser acrylic enclosure for the 3.5inch LCD Shield for Odroid C1, Odroid C1+ and Odroid C2. Color: Smoky Blue
Laser acrylic enclosure for the 3.5inch LCD Shield for Odroid C1, Odroid C1+ and Odroid C2. Color: Smoky White
Fully assembled 3.5inch display with 480x320 pixels TFT LCD and a resistive touch overlay. Just plug it on top of ODROID-C2/C1+/C0. ODROID-XU4 needs the Shifter-Shield board to use this display.
Lithium Polymer rechargeable cell with a Protection circuit. Compatible with ODROID-C0
Mini USB Bluetooth dongle compatible with ODROID-C1, C1+, C0, C2 and XU3, XU4
What you need is an add on prototyping T-breakout board, which can break out all those tasty power, GPIO, I2C, ADC pins from the 40 pin header onto a solderless breadboard. This set will make "cobbling together" prototypes with the ODROID-C1 super easy
Perfect connector pack for various DIY projects with the ODROID-C0
Pre-installed Android 4.x or latest version. eMMC Version 5.0 interface or higher version from Samsung. JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode
Pre-installed Android 4.x or latest version. eMMC Version 5.0 interface or higher version from Samsung. JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode
Pre-installed Android 4.x or latest version. eMMC Version 5.0 interface or higher version from Samsung. JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode
Pre-installed Android 4.x or latest version. eMMC Version 5.0 interface or higher version from Samsung. JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode
Pre-installed Ubuntu 14.04 or latest version. eMMC Version 5.0 interface or higher version from Samsung.JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode