Mini ST-LINK/V2, in-circuit debugger/programmer for STM8 and STM32
The S9V11MA switching step-up/step-down regulator efficiently produces a...
10 DOF IMU Sensor (B), Inertial Measurement Unit, Lower Power Consumption
SEN-12636 - 9 Degrees of Freedom IMU Breakout - LSM9DS0
MEMS accelerometer, magnetometer and gyroscope on a single die with a high speed ARM Cortex-M0 based processor
V4 features the same sensors as v3 (L3GD20H, LSM303D) and adds an LPS25H digital barometer. An I²C interface accesses 10 independent measurements that can be used to calculate the sensor’s altitude and absolute orientation.
Inertial measurement unit (IMU) and altimeter that features the same LSM6DS33 gyro and accelerometer and LIS3MDL magnetometer as the MinIMU-9 v5, and adds an LPS25H digital barometer. Pololu 2739
Add motion, direction and orientation sensing to your wearable FLORA project with this high precision 9-DOF sensors: 3-axis accelerometer, 3-axis magnetometer and 3-axis gyroscope. Adafruit 2020
SEN-10121 - IMU Digital Combo Board - 6 Degrees of Freedom ITG3200/ADXL345
10DOF module, nine-axis attitude the instrument L3G4200D, ADXL345, HMC5883L and BMP085 , RoHS
10DOF - HMC5883L + BMA180 + ITG3205 + BMP085 MultiWii MWC flight control module, RoHS
CHR-UM6 Orientation Sensor
MinIMU-9 Gyro, Accelerometer, and Compass (L3G4200D and LSM303DLM Carrier)
LSM303DLM 3D Compass and Accelerometer Carrier with Voltage Regulators
The Pololu MinIMU-9 v5 is an inertial measurement unit (IMU) that packs an LSM6DS33 3-axis gyro and 3-axis accelerometer and an LIS3MDL 3-axis magnetometer onto a tiny 0.8″ × 0.5″ board.
The UM7-LT orientation sensor from Redshift Labs is an Attitude and Heading Reference System (AHRS) that contains a three-axis accelerometer, rate gyro, and magnetometer. It combines this data using an Extended Kalman Filter to produce attitude and heading estimates. This LT version of the UM7 does not have an enclosure.