The DE10-Standard Development Kit presents a robust hardware design...
This is a very special adapter, specifically used for adapting our...
DS3231 Precision RTC FeatherWing adds an extremely accurate...
The Pmod TMP3 is an ambient temperature sensor built around the...
Raspberry Pi Sense HAT The Sense HAT has an 8×8 RGB LED matrix, a...
10 DOF IMU Sensor (B), Inertial Measurement Unit, Lower Power Consumption
Inertial measurement unit (IMU) and altimeter that features the same LSM6DS33 gyro and accelerometer and LIS3MDL magnetometer as the MinIMU-9 v5, and adds an LPS25H digital barometer. Pololu 2739
SEN-11341 - Gyro Breakout Board - LPY503AL Dual 30°/s
Pololu - 2129
Open4 hardware extension with MEMS 3-axis gyroscope, magnetometer, pressure and temperature sensors
PmodGYRO - 3-Axis Digital Gyroscope
1-axis High Performance Gyroscope, Digilent, RoHS
L3GD20 3-Axis Gyro Carrier with Voltage Regulator
LPY510AL Dual-Axis (Pitch and Yaw or XZ) Gyro with ą100°/s and ą400°/s Ranges
LPR550AL Dual-Axis (Pitch and Roll or XY) Gyro with ą500°/s and ą2000°/s Ranges
LPY550AL Dual-Axis (Pitch and Yaw or XZ) Gyro with ą500°/s and ą2000°/s Ranges
L3G4200D 3-Axis Gyro Carrier with Voltage Regulator
MEMS demonstration board based on the LPR430AL (analog output two-axis gyroscope)
three-axis digital output gyroscope, three-axis angular rate sensor module, I2C/SPI interface, L3G4200D on board