This module can be applied to intellectual robot, obstacle avoidance...
This kit comes with AlphaBot robotic platform (line tracking, obstacle...
Bare Conductive’s Electric Paint is just like any other water-based paint… except that it’s electrically conductive! This means that you can actually paint wires onto things like models, clothes, furniture, walls, almost anything you can think of. COM-11521
COM-10994 - BarePaint - Conductive Paint (50ml)
Adafruit 519 - Conductive Rubber Cord Stretch Sensor + extras!
DEV-10868 - Conductive Stainless Fiber - 1oz
DEV-10867 - Conductive Thread Bobbin - 30ft (Stainless Steel)
Comes with a 6"x6" (152mm x 152mm) square of Pyralux. It's ED-Y type copper at 35um (1 oz/ft2) and has a polymide of 25um (1 mil). The thick copper layer means it can carry a lot of current, and its trivial to solder to it. Adafruit 1894
FLORA is Adafruit's fully-featured wearable electronics platform. It's a round, sewable, Arduino-compatible microcontroller designed to empower amazing wearables projects. Adafruit 659
Add motion, direction and orientation sensing to your wearable FLORA project with this high precision 9-DOF sensors: 3-axis accelerometer, 3-axis magnetometer and 3-axis gyroscope. Adafruit 2020
Sewable with a 3-pin JST wiring adapter with 3 holes on the board perfect for conductive thread or soldering, wired to a single 3-pin JST-PH Adapter. Sdafruit 2566
Ambient Light Sensor, SI1145, connects to the I2C bus pads. Adafruit 1981
Knit conductive 100% silver fabric with resistance of less than 1 ohm per foot in any direction across the textile. Great for use with FLORA. 20 cm x 20 cm piece. Adafruit 1167
This knit jersey conductive fabric is 63% cotton, 35% silver yarn and 2% spandex. Use small pieces for soft switches, plush keypads, capacitive touch sensors, and other textile interfaces. Adafruit 1364
Pressure-Sensitive Conductive Sheet. Adafruit 1361